Circuit Monkey
Electronics for Hobbyists
View Item

Motor Controller, 2 channel, 1 Amp

  • Power supply voltage; VM = 15 V(Max)
  • Output current; IOUT=1.2 A(ave) / 3.2 A (peak)
  • Output low ON resistor; 0.5Ω (upper+lower Typ. @VM ≥ 5 V)
  • Standby (Power save) mode
  • CW / CCW / short brake / stop function modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • Easy to attach terminal blocks for motor power (VM) and motor wires
  • RobiCon compliant connector for control and logic power.
  • RobiCon compliant connector for optional PWM control (internal pull-ups when not used).
  • RobiCon compliant board outline and mounting.
  • 40mm x 30mm x 12.1mm (WxDxH)
  • 1.6"W x 1.2"D x 0.48"H
  • 7.94g (0.28oz)

  • "Full control of small motors!"

    Item Number: 500-0025-01
    Price: us$15.50
    Shipping:  USA us$4.00 S/H Inside USA
    INTL (us$8.00 S/H Outside USA)

    In stock! Now shipping.

    Uses the Toshiba TB6612FNG driver IC for DC motor applications. Output transistor in LD MOS H-bridge structure with low on-resistance.

    Two input signals per channel. Capable of four modes: CW, CCW, short brake, and stop mode

    Independently control two motors from 2.5V to 13.5V at up to 1Amp each(see TB6612FNG datasheet for exceptions).

    Optional PWM input for even more control.

    Logic section powered by 5V from RobiCon connector.

    9-pin wire harness included. (PN:520-1109-01)

    4-pin wire harness included. (PN:520-1104-01)

    Adobe PDF File Toshiba TB6612FNG Specification
      You will need the Adobe Acrobat Reader to view this file. Download it here
    Adobe PDF File Motor Controller User Guide 1.0
      You will need the Adobe Acrobat Reader to view this file. Download it here

    UID: 000031