Circuit Monkey
Electronics for Hobbyists
View Item

Cable, RobiCon, 10cm, 6-pin to 3-pin/2-pin, for Serial-TTL

  • 6-pin Molex 51004-0600 at end 'A'
  • 2-pin Molex 51004-0200 at end 'B'
  • 3-pin Molex 51004-0300 at end 'B'
  • 10cm wire length
  • RobiCon compatible wire harness.

  • Item Number: 520-1002-01
    Price: us$2.95
    Shipping:  USA us$2.00 S/H Inside USA
    INTL (us$4.00 S/H Outside USA)

    This cable harness lets you connect our USB-to-Serial board 6-pin connector to either the DragonFly or Nymph board. Pre-terminated with a Molex 51004-0600 at one and and then splits into a 3-pin and 2-pin Molex connector.

    The 6-pin connector has 5 wires installed ( RX,TX, DTR, +5V, Ground ). The 3-pin connector provides DTR (used for Reset), +5V and Ground. The RX and TX are provided on the 2-pin connector.

    This cable enables Arduino functionality with our DragonFly and Nymph boards when paired with our USB-Serial adapter. This cable can be used in other projects when using the USB-Serial adapter.

    For use with boards:

  • Nymph ATmega328P Controller
  • DragonFly ATmega1280 Controller

  • UID: 000108